Kyosho Ultima RB6

[skeeter]

Jun 9, 2014 1:31:42 GMT matrix said:

Anyone running the MIP "Pucks" Kyosho Ultima RB6 Drive System?

Yeah I'm running the MIP "Pucks" Kyosho Ultima RB6 Drive System. No longer will differential outdrives and CV bones wear simultaneously; with the puck system, all that is needed is an easy change of the Pucks™ when necessary, and the drivetrain stays tighter and fresher for longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

[matrix]

Jun 10, 2014 20:51:42 GMT skeeter said:

Jun 9, 2014 1:31:42 GMT matrix said:

Anyone running the MIP "Pucks" Kyosho Ultima RB6 Drive System?

Yeah I'm running the MIP "Pucks" Kyosho Ultima RB6 Drive System. No longer will differential outdrives and CV bones wear simultaneously; with the puck system, all that is needed is an easy change of the Pucks™ when necessary, and the drivetrain stays tighter and fresher for longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

You convinced me on buying the MIP Pucks!!!

[skeeter]

Jun 13, 2014 8:12:14 GMT matrix said:

Jun 10, 2014 20:51:42 GMT skeeter said:

Yeah I'm running the MIP "Pucks" Kyosho Ultima RB6 Drive System. No longer will differential outdrives and CV bones wear simultaneously; with the puck system, all that is needed is an easy change of the Pucks™ when necessary, and the drivetrain stays tighter and fresher for longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive.

You convinced me on buying the MIP Pucks!!!

You should also buy the Avid RC Triad Kyosho Aluminum Topshaft. It allow racers to run the Triad slipper clutch along with optional Triad spur gears 69, 72, 75, 76, 78, 81, 84, and 87. Perfect for stock racers limited by Kyosho spur gear selection.

[flash]

Tower Hobbies has began to carry the RB6.

www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEMUD&P=ML

[Erc]

Checkout this rb6 review done by Kiel Lewis.

[skeeter]

What parts has he upgraded?

[superrcracer]

Jun 21, 2014 23:59:10 GMT skeeter said:

What parts has he upgraded?

You can upgrade to exotek parts. Checkout there website www.exotekracing.com/

[skeeter]

Jun 23, 2014 19:00:28 GMT superrcracer said:

Jun 21, 2014 23:59:10 GMT skeeter said:

What parts has he upgraded?

You can upgrade to exotek parts. Checkout there website www.exotekracing.com/

Have you tried those part out before?

[kyoshoracer]

Has anyone tried Mid-motor on low-med bite tracks?

[skeeter]

What setup are you guys running on the rb6?

[superrcracer]

Jul 8, 2014 22:45:38 GMT skeeter said:

What setup are you guys running on the rb6?

If your running mid motor I would recommend running Jared Tebo's 2014 cactus classis setup.



www.kyoshoamerica.com/assets/images/setups/RB6%20Cactus%202014.pdf

[rcracer328]

i would recommend cody kings reedy race setup for mid motor if you are running clay even if it is med bite

[skeeter]

Jul 11, 2014 17:19:55 GMT rcracer328 said:

i would recommend cody kings reedy race setup for mid motor if you are running clay even if it is med bite

I'll take a look at his setups.

[rcracer328]

Jul 13, 2014 5:41:36 GMT skeeter said:

Jul 11, 2014 17:19:55 GMT rcracer328 said:

i would recommend cody kings reedy race setup for mid motor if you are running clay even if it is med bite

I'll take a look at his setups.

yea go on the kyosho website itself not his personal site cause he doesn't have his 1/10 scale stuff on there.

[skeeter]

Jul 13, 2014 6:47:03 GMT rcracer328 said:

Jul 13, 2014 5:41:36 GMT skeeter said:

I'll take a look at his setups.

yea go on the kyosho website itself not his personal site cause he doesn't have his 1/10 scale stuff on there.

Is this the setup your referring to www.kyoshoamerica.com/assets/images/setups/RB6_Set_Up_CodyK_Reedy2014_V1-D%20copy.pdf?