Intech Racing ER-12 Pro

[flash]

 Intech Racing ER-12 Pro Thread

[flash]

The new ER-12 Pro Buggy from INTECH Racing raises the bar in the 2wd 1/10th scale buggy class. The ER-12 includes hundreds of dollars worth of high strength CNC Swiss 7075 Aluminum and light weight Carbon Fiber parts only available as aftermarket/option parts on all other brands of racing kits. INTECH Racing spared no expense to bring you the best 2wd racing kit right out of the box with out having to buy any hop-up parts to compete at the highest racing level.

[matrix]

The Intech Racing ER-12 Pro is a pretty nice buggy. You get Carbon fiber towers and battery holder for 274.99.

[flash]

Features included:
Mid and Rear motor configurations with same 3 gear gearbox

CNC Aluminum hard anodized Chassis with 25' kick-up for a lower center of gravity and longer life

4mm Light weight carbon fiber graphite front & rear shock towers

Carbon Fiber ackerman steering plate for a precise zero slop steering rack

Carbon Fiber battery hold down strap

CNC Aluminum 12.5mm Big Bore threaded shocks with Bladders, CNC alum caps, CNC bottom caps, and CNC spring adjusting nuts

CNC 7075 Aluminum rear anti-squat and MM and RM toe suspension blocks

CNC Aluminum 12mm rear wheel hexes

CNC 7075 Aluminum Imperial size front axles

CNC Aluminum front inner camber link mounts

CNC Aluminum top gear shaft with dual slipper pad spur gear

CNC Aluminum rear chassis brace mount


CNC 7075 Aluminum upper shock mounts

CNC Aluminum motor mount plate

CNC Aluminum Slipper Clutch plates

CNC Aluminum motor plate spacers

72mm Captured steel CVD's


Ball Bearing steering bell cranks with CNC Aluminum top brace

Externally adjustable slipper clutch nut

Adjustable Caster from 15-35'

Adjustable Rear Toe from 1.5-4.5'

Adjustable wheel base from +/-11mm

Adjustable steering arms for forward or trailing +/-5mm

Adjustable battery location

Adjustable front & rear roll center

Front & Rear arm sweep for increased traction and lower center of gravity

Front chassis slot for weight additions when additional steering is needed

Plastic side guards to allow proper chassis flex for better traction and bump handling

Front and rear droop screw adjustments

Captured hinge pins throughout

Forward Cab body and high down-force lexan wing

87T Light weight spur gear

20T Steel top shaft gear

52T Diff gear

6x1.1mm, 6x1.2mm, and 6x1.3mm shock pistons

Light weight zero flex white front & rear wheels

Black alloy metric screws throughout

Metric ball bearings throughout

[flash]

[RC Mamba]

May 28, 2014 0:11:16 GMT matrix said:

The Intech Racing ER-12 Pro is a pretty nice buggy. You get Carbon fiber towers and battery holder for 274.99.

I wonder how durable and how the ER-12 performs on the track for that price?

[matrix]

May 28, 2014 6:41:19 GMT RC Mamba said:

May 28, 2014 0:11:16 GMT matrix said:

The Intech Racing ER-12 Pro is a pretty nice buggy. You get Carbon fiber towers and battery holder for 274.99.

I wonder how durable and how the ER-12 performs on the track for that price?

It depends on what kind of material they use. It also depends on what types of carbon fiber modulus they used. There are low modulus, standard modulus, intermediate modulus, and high modulus. Modulus is how stiff the fiber is- the higher the modulus the stiffer the carbon fiber is. 

[RC Mamba]

I was reading that the higher modulus tends to crack easier than the low modulus.

[matrix]

May 29, 2014 22:32:27 GMT RC Mamba said:

I was reading that the higher modulus tends to crack easier than the low modulus.

That true, I would go with a middle modulus on my car.

[RC Mamba]

May 31, 2014 4:01:45 GMT matrix said:

May 29, 2014 22:32:27 GMT RC Mamba said:

I was reading that the higher modulus tends to crack easier than the low modulus.

That true, I would go with a middle modulus on my car.

What's the chassis made off?

[matrix]

Jun 1, 2014 1:59:36 GMT RC Mamba said:

May 31, 2014 4:01:45 GMT matrix said:

That true, I would go with a middle modulus on my car.

What's the chassis made off?

I think the chassis is made out of Aluminum.

[RC Mamba]

Jun 2, 2014 4:32:29 GMT matrix said:

Jun 1, 2014 1:59:36 GMT RC Mamba said:

What's the chassis made off?

I think the chassis is made out of Aluminum.

I was reading that the ER-12 features Carbon Fiber ackerman steering plate for a precise zero slop steering rack and Carbon Fiber battery hold down strap.

[matrix]

I'm debating on getting the er-12 or the b5. The great feature about the er-12 is that is comes with carbon fiber towers and comes fully upgraded.

[osmosis]

May 28, 2014 0:12:21 GMT flash said:

Is that a new brand of car?? I have never heard of intech.

[flash]

Jun 7, 2014 2:37:07 GMT osmosis said:

May 28, 2014 0:12:21 GMT flash said:

Is that a new brand of car?? I have never heard of intech.

Yeah. its a Chinese brand. It's a really great car to purchase. As you can see on the picture you get carbon fiber parts.