Losi 22SCT Kit

[flash]

May 26, 2014 23:07:34 GMT superrcracer said:

You should upgrade to the Team Losi Racing 4mm Aluminum Trailing Spindle Set. The trailing spindles produce more corner exit steering compared to inline spindles and will help to reduce corner exit push.

With the Aluminum Trailing Spindle you get more traction out of the corner right?

[RC Mamba]

Anyone running the aluminum gears or spur gears?

[osmosis]

I recommend upgrading the MIP Aluminum TLR 22SCT C-CVD Kit. The MIP Aluminum TLR 22SCT C-CVD Kit removes over 40% of the rotating mass compared to the stock components. This delivers an improvement in acceleration and cornering speed.

[superrcracer]

Jun 19, 2014 21:34:51 GMT osmosis said:

I recommend upgrading the MIP Aluminum TLR 22SCT C-CVD Kit. The MIP Aluminum TLR 22SCT C-CVD Kit removes over 40% of the rotating mass compared to the stock components. This delivers an improvement in acceleration and cornering speed.

Do you have the Team Losi Racing Support Kit
?

[osmosis]

Jul 22, 2014 20:05:01 GMT superrcracer said:

Jun 19, 2014 21:34:51 GMT osmosis said:

I recommend upgrading the MIP Aluminum TLR 22SCT C-CVD Kit. The MIP Aluminum TLR 22SCT C-CVD Kit removes over 40% of the rotating mass compared to the stock components. This delivers an improvement in acceleration and cornering speed.

Do you have the Team Losi Racing Support Kit
?

Yeah!! For sixty bucks you get the following:


(2) TLR2052 - Rear Hub

(1) TLR2051 - Camber Tower, Rear

(1) TLR1056 - Rack, Steering

(1) TLR1058 - Caster Block, 5 Deg, Left

(1) TLR1058 - Caster Block, 5 Deg, Right

(1) TLR1106 - Front Arm, L

(1) TLR1106 - Front Arm, R

(1) TLR2051 - Front Camber Block

(1) TLR2103 - Rear Arm, L

(1) TLR2103 - Rear Arm, R

(1) TLR1107 - Spindle, 4mm Trail, L

(1) TLR1107 - Spindle, 4mm Trail, R

(2) TLR2966 - Idler Gear, 27T, Trans

(2) TLR5092 - Bushing, Shock, Upper

(1) TLR1554 - Servo Horn, 23T

(1) TLR1554 - Servo Horn, 24T

(1) TLR1554 - Servo Horn, 25T

(4) TLR1114 - Body Post

(2) TLR2937 - Wheel Hex, Rear

(2) Front Hex

(8) TLR5093 - O-Ring, Shaft

(8) TLR6017 - Rod End, 4.8mm, HD

(1) TLR6063 - Turnbuckle, HD, 60mm

(1) TLR6064 - Turnbuckle, HD, 65mm

(1) TLR6065 - Turnbuckle, HD, 70mm

(2) TLR5163 - Spring, Rear, 1.8 Rate (white)

(2) TLR5168 - Spring, Rear, 2.3 Rate (pink)

(2) TLR5182 - Spring, Front, 3.5 Rate (green)

(2) TLR5184 - Spring, Front, 4.1 Rate (black)

[superrcracer]

That's a good deal!!

[osmosis]

Jul 28, 2014 18:56:10 GMT superrcracer said:

That's a good deal!!

I got two of this on my tool box.....

[superrcracer]

Jun 19, 2014 21:34:51 GMT osmosis said:

I recommend upgrading the MIP Aluminum TLR 22SCT C-CVD Kit. The MIP Aluminum TLR 22SCT C-CVD Kit removes over 40% of the rotating mass compared to the stock components. This delivers an improvement in acceleration and cornering speed.

Have you tried out the Schelle bearing set for the 22sct?

[osmosis]

Aug 5, 2014 0:41:00 GMT superrcracer said:

Jun 19, 2014 21:34:51 GMT osmosis said:

I recommend upgrading the MIP Aluminum TLR 22SCT C-CVD Kit. The MIP Aluminum TLR 22SCT C-CVD Kit removes over 40% of the rotating mass compared to the stock components. This delivers an improvement in acceleration and cornering speed.

Have you tried out the Schelle bearing set for the 22sct?

No, I run the Losi Stock bearings.

[superrcracer]

Aug 11, 2014 23:07:14 GMT osmosis said:

Aug 5, 2014 0:41:00 GMT superrcracer said:

Have you tried out the Schelle bearing set for the 22sct?

No, I run the Losi Stock bearings.

Do you know if the Schelle Nova Slipper Assembly- SC, fit the Losi 22SCT?

[osmosis]

Aug 14, 2014 1:16:19 GMT superrcracer said:

Aug 11, 2014 23:07:14 GMT osmosis said:

No, I run the Losi Stock bearings.

Do you know if the Schelle Nova Slipper Assembly- SC, fit the Losi 22SCT?

Are you referring to this one SCH1302?

[superrcracer]

Aug 20, 2014 21:36:31 GMT osmosis said:

Aug 14, 2014 1:16:19 GMT superrcracer said:

Do you know if the Schelle Nova Slipper Assembly- SC, fit the Losi 22SCT?

Are you referring to this one SCH1302?

Yeah, that's the Schelle Nova Slipper Assembly.

[osmosis]

Yeah, that should fit the TLR 22 SCT Kit.